内插旋流片的管内流动与换热的数值模拟

通过数值模拟,详细考察了光管内间隔插有旋转角为270.°、旋流角为38.1°旋流片的速度场与热流场的分布特性及其相互间的协同，并对4种旋流片的场协同数进行了比较。结果表明，在同样Reynolds数下，根据场协同数的大小来排列的旋流片类型依次为270-38.1、180-38.1、270-20.3、180-20.3，且与传热性能高低排列是一致的。通过改善速度场与温度梯度场的协同程度是提高换热性能的一个有效手段，且内插旋流片能有效地改善速度场与温度梯度场的协同程度从而提高换热性能。     

Ce:Nd:ZnWO4激光晶体的生长及其光谱性能

采用提拉法生长出光学质量的Nd:ZnWO4,Ce:ZnWO4和Ce:Nd:ZnWO4晶体.通过X射线衍射仪对晶体样品的微观结构进行了分析.测试了晶体的吸收光谱、电感耦合等离子体原子发射光谱和荧光光谱.根据Judd-Ofelt理论计算出Nd:ZnWO4晶体中Nd3 的强度参数为:Ω2=6.820 2×10-20 cm2,Ω4=0.463 3×10-20 cm2,Ω6=0.443 5×10-20 cm2.研究了Ce3 和Nd3 之间的能量转移现象.结果表明:Nd3 在850 nm激发时产生上转换发射峰位于474 nm和572 nm处,分别对应于2G9/2,4K13/2到基态能级4I9/2跃迁,计算出该峰的自发辐射几率为1 360 s-1,荧光寿命为7.353×10-4 s,发射截面为0.905 9×10-23 cm2.     

Synthesis of N-methylglucamine modified macroporous poly(GMA-co-TRIM) and its performance as a boron sorbent

A chelating polymeric sorbent was developed by functionalizing poly(glycidyl methacrylate-co-trimethylolpropane trimethacrylate), poly(GMA-co-TRIM), with N-methylglucamine (MG) via a simple post-grafting route. The resulting well-defined millimeter-sized spheres of poly(GMA-co-TRIM)–MG had permanent macropore structures and low swelling degree, with accessible ligands of 1.84 mmol/g. The boron adsorption behavior of the sorbent was studied in batch mode by varying different parameters like the pH value, the initial concentration of boron and the adsorption time under noncompetitive conditions. It was found that the sorbent always maintained the high capacity between pH 2.6 and 8.6, in which the optimum pH was 7.5. The adsorption behavior of the sorbent obeyed the Langmuir isotherm well. The adsorption capacity of the sorbent for boron was in the same level as that of a commercially available N-methylglucamine-type polystyrene resin. However, it adsorbed boron more quickly. The sorbent also showed good durability and reusability through the fixed-bed adsorption tests. The study on the separation of boron from brine of salt lake showed a high selectivity of the sorbent, though the capacity for boron decreased due to the interference of diverse ions in brine.     

低磷共聚物对黄铜的缓蚀作用

采用失重法、能量散射X-射线、电化学方法，研究了自制低磷共聚物在配制冷却水中对黄铜的缓蚀作用，分析了空白实验和加入低磷共聚物后黄铜试片的表面元素组成，探讨了低磷共聚物的缓蚀机理。结果表明，低磷共聚物在黄铜试片表面活性位置吸附抑制了阳极电化学过程。     

无水硫酸氢钾催化合成3-烷氧基噻吩

以CuBr为催化剂,N-甲基-2-吡咯烷酮为溶剂,在110℃用3-溴噻吩与过量的甲醇钠进行取代反应合成3-甲氧基噻吩,收率为82.3%。再以无水KHSO4为催化剂,3-甲氧基噻吩分别与乙醇、丙醇、丁醇、戊醇、己醇和辛醇在105~115℃反应2.5、2.5、3、3.5、3.5和3.5h,合成了3-乙氧基噻吩、3-丙氧基噻吩、3-丁氧基噻吩、3-戊氧基噻吩、3-己氧基噻吩和3-辛氧基噻吩,收率分别为75.8%、73.5%7、0.4%、68.7%、66.3%、55.3%。这些化合物结构都通过IR1、HNMR和MS进行了表征,还进行了初步香味评价。结果表明它们都具有基本肉香味的特征。     

预成膜雾化超临界流体强制分散溶液过程及应用

设计了预成膜二流式喷嘴用于超临界流体强制分散溶液(SEDS)过程以获得良好的雾化与传质效果。采用预成膜雾化的SEDS(SEDS-PA)过程对胡萝卜素、麻黄素及黄芩甙进行了超细和聚合物包覆实验以考察该法制备药物微粒和载药聚合物微粒的有效性。通过SEM及光学显微镜照片分析微粒形态,用分光光度法检测药物在聚合物微粒中的含量。实验表明,通过SEDS-PA过程可成功地对天然药物超细化,并用聚合物对其包覆,从而制备药物微粒及载药聚合物微粒。     

Effect of surfactant microstructures on photocatalytic degradation of phenol and chlorophenols

The effect of hexadecyltrimethylammonium bromide (HTAB) on the photocatalytic degradation of phenol (Phe), 2,5-dichlorophenol (2,5-DCP) and 2,4,5-trichlorophenol (2,4,5-TCP) in the presence of aqueous TiO₂ suspensions at pH ca. 5 was investigated using a laboratory photoreactor equipped with a medium-pressure mercury lamp. Inhibition of substrate decomposition was observed for phenol, both below and above the surfactant critical micellar concentration, whereas a more complex behaviour was exhibited by chlorophenols. It was found that adsorption of these compounds onto the surfactant-modified semiconductor particles facilitates their faster decomposition, but the competitive partition of substrates between adsorbed surfactant structures and micellar aggregates tends to limit the beneficial kinetic effects at higher amphiphile concentrations. The crucial influence of surfactant adsorption was clearly evidenced in some runs performed at pH 3. Relevant inhibition of chloride release from chlorophenols, observed in the presence of HTAB, indicates a higher persistence of reaction intermediates in the reaction media, suggesting the need for a careful investigation of surfactant effects on all the degradation steps of the process.     

高黏度苯丙乳液的制备

为了制备高性能的苯丙乳液，研究了乳化剂、助剂DZ-1及丙烯酸对苯丙乳液黏度及触变指数等性能的影响。研究结果表明：乳化剂用量低反应生成的凝聚物较多，用量大乳液的气泡较多。乳液的黏度和触变指数随DZ—1用置增大而大幅度提高。乳液黏度随丙烯酸用量的增加而提高，但用量超过3％后，耐水性能变差。乳化剂用量为1．0％，DZ-1用量为4．5％，酸用量为3．0％时合成的苯丙乳液黏度和触变指数较高。用该苯丙乳液配制的涂料黏度高、触变性好，耐擦洗及耐水性好，综合性能优良。     

Nonlinear multiobjective model-predictive control scheme for wastewater treatment process

A nonlinear multiobjective model-predictive control (NMMPC) scheme, consisting of self-organizing radial basis function (SORBF) neural network prediction and multiobjective gradient optimization, is proposed for wastewater treatment process (WWTP) in this paper. The proposed NMMPC comprises a SORBF neural network identifier and a multiple objectives controller via the multi-gradient method (MGM). The SORBF neural network with concurrent structure and parameter learning is developed as a model identifier for approximating on-line the states of WWTP. Then, this NMMPC optimizes the multiple objectives under different operating functions, where all the objectives are minimized simultaneously. The solution of optimal control is based on the MGM which can shorten the solution time. Moreover, the stability and control performance of the closed-loop control system are well studied. Numerical simulations reveal that the proposed control strategy gives satisfactory tracking and disturbance rejection performance for WWTP. Experimental results show the efficacy of the proposed method.